Why is a 2x4 Actually 1.5x3 5? : 네이버 블로그
NAVER 블로그
삼성역 피부과 찾는다면, 비앤에스의원
블로그 검색
이 블로그에서 검색
공감 0
칭찬 0
감사 0
웃김 0
놀람 0
슬픔 0
span.u_likeit_button) 공감 face 3개 (전체)) -->
공감 0
공감 0
칭찬 0
감사 0
웃김 0
놀람 0
슬픔 0
첫 댓글을 남겨보세요
공유하기
블로그 주소 변경 불가 안내
블로그 마켓 판매자의 이력 관리를 위해
블로그 주소 변경이 불가합니다.
자세히 보기 레이어 닫기
블로그 아이디가 필요해요!
블로그에서 진짜 나를 기록하고
다양한 이웃과 소식을 만나보세요. 지금 시작해볼까요?
블로그 아이디 만들기 블로그 아이디 만들기 레이어 닫기
blog.naver.com/
입력 내용 삭제
설정한 아이디는 나중에 변경할 수 없으니 신중하게 입력해주세요.
변경 전 공유된 블로그/글/클립 링크는 연결이 끊길 수 있습니다.
네이버 아이디 또는 개인정보가 포함된 문자 사용은 피해주세요.
블로그 도움말에서 아이디 변경 유의사항을 확인해보세요.
나중에 할게요
- 이전 주소로 공유된 글은
3개월간 새로운 주소로 연결을 지원하며
이후 언제든 연결이 끊길 수 있습니다.
- 블로그 아이디는 한번 변경하면
다시 변경이 불가능합니다.
변경하시겠습니까?
취소 확인
블로그 아이디는 한번 정하면
다시 변경이 불가능합니다.
이 아이디로 블로그를 만들까요?
취소 확인
환영합니다!
블로그 아이디가 만들어졌어요.
blog.naver.com/
바로 시작하기 추가정보 입력하기
기본정보를 입력해주세요.
나중에 언제든지 변경할 수 있어요.
프로필 이미지 설정
지우기
사진 업로드
취소 적용
별명
블로그명
블로그 주제 주제 없음
엔터테인먼트·예술
문학·책
영화
미술·디자인
공연·전시
음악
드라마
스타·연예인
만화·애니
방송
생활·노하우·쇼핑
일상·생각
육아·결혼
반려동물
좋은글·이미지
패션·미용
인테리어·DIY
요리·레시피
상품리뷰
원예·재배
취미·여가·여행
게임
스포츠
사진
자동차
취미
국내여행
세계여행
맛집
지식·동향
IT·컴퓨터
사회·정치
건강·의학
비즈니스·경제
어학·외국어
교육·학문
주제없음
주제 선택 보류
나중에 할게요
기본정보 입력 주제 선택 이웃 맺기
뒤로가기 버튼
주제를 선택해 주세요.
선택한 주제의 글과 이웃을 추천받을 수 있어요.
나중에 할게요
기본정보 입력 주제 선택 이웃 맺기
뒤로가기 버튼
인기블로거와 이웃을 맺으세요.
이웃을 맺으면 이웃새글에서 글을 받아볼 수 있어요.
블로그 시작하기
기본정보 입력 주제 선택 이웃 맺기
뒤로가기 버튼
확인
확인
이웃추가 이웃
메뉴 바로가기 본문 바로가기
내 블로그
이웃블로그
-
블로그 홈
로그인
검색어 켜기
-->
| 프롤로그 블로그 | 지도 서재 안부 |
블로그
글쓰기
가벼운 글쓰기툴 퀵에디터가 오픈했어요!
| | | |
| 공지글 글 제목 | 작성일 | |
|---|---|---|
| 공지 [NEW] 대치동 삼성비앤에스 비만치료제 위고비 도입! | 2024. 11. 7. |
| | | |
| | | |
| | - 103개의 글 -목록열기 | |
| | | |
| | | |
Why is a 2x4 Actually 1.5x3 5?
비앤에스
・ 2022. 12. 23. 16:37
URL 복사
이웃추가
본문 기타 기능
공유하기
신고하기
Why is a 2x4 Actually 1.5x3 5? Whether you're a homeowner or a do-it-yourselfer, you've likely wondered why is a 2x4 actually a 1.5x3.5 inch board? While this might not be the first thing that comes to mind, it's a commonly used size in construction, and the answer isn't as simple as it sounds.
When wood production first began in the United States, a timber that measured two inches by four inches was a bit of a stretch. Before mass production began, lumber was cut to order, and there were a variety of wood sizes and types. There was a lot of variation between locations, but it seemed that the forests of North America were an unlimited resource. A few decades after the turn of the century, the lumber industry was under great pressure to compete with alternatives such as concrete block and engineered products. This resulted in a lot of litigation and a lot of arguing over the best wood-sizing practices.
Eventually, the lumber industry settled on a new wood-sizing standard. The result was a more uniform size and more predictable dimensions. These new lumber standards have been refined over the last several decades, but the popular lexicon hasn't caught up with the new standard.
One thing to note is that the standard lumber sizes may vary by state. The lumber industry is currently under great pressure to compete with other market alternatives, and the size of a board doesn't necessarily tell you how well the wood will perform in a given situation. One example is that a 3x4 will actually roll off your tongue a little better than a 2x4.
Another reason for the size discrepancy is that a board that measures a nominal 2x4 will actually be a bit smaller than a real 2x4. During the heyday of 2x4 lumber, mills used to cut the wood to rough dimensions before cutting it down to a more reasonable size. This gave the timber a more uniform look, and it also gave mills a way to account for shrinkage as the wood dried. The finished size of a board, however, is usually exactly 1.5x3.5.
The best way to explain this discrepancy is to consider that the nominal 2x4 board isn't the actual 2x4 wood. The lumber is milled down to a smaller size to maximize its use. During this process, the width is reduced by about half an inch, and the thickness is reduced by a quarter inch. The board is then planed to its optimum size, which should yield a finished product that measures 1.5x3.5 inches.
The best way to figure out the true size of your wood is to measure it from the center of an interior wall. If you aren't an architect, you can also try to measure from the center of a door or window. A true contractor will be happy to help, but a novice do-it-yourselfer might not know which size is best. If you're doing a small project, you can probably find a 1.5x3.5 board.
