As Forehead Filler Molding Changes the Level of Finish

The forehead, an important element that shapes first impressions,

accounts for as much as one-third of the face.

For this reason, it tends to draw attention,

and there is a lot to consider, from volume and wrinkles to size.

Even if it is covered by bangs, a forehead that is sunken

without volume can reduce attractiveness,

which can also lead to concerns about appearance.

Even people who once had a fuller forehead

may find that, over time, the soft tissue and bone structure

undergo aging and become sunken.

In such cases, there are a few ways to address it.

Implant insertion, fat grafting, and

forehead filler molding are representative options.

Even if you have concerns about your appearance,

if you do not want to take on the risks,

you will likely choose filler, which is generally referred to as a mini procedure.

That is because it can relatively easily address the concern

without the burden of incisions, bleeding, or hospitalization.

Still, it is not something you can decide on easily.

Because the level of finish can differ for each person

depending on how it is performed,

it is best to make the decision carefully.

Here is some information to help you decide.

For the desired shape

The reason people prioritize forehead filler molding

before the procedure is due to the characteristics of the product.

It involves injecting hyaluronic acid, a substance with a viscosity similar to skin and friendly to the human body,

into areas that are sagging or sunken.

As it spreads within the body, it settles in a three-dimensional way

and can be completed into the desired shape.

For that, forehead filler molding is necessary.

The procedure sequence is as follows.

To create a result that naturally suits the overall face shape and facial features,

it needs to be guided to settle evenly.

While separating the space above the periosteum from the muscle layer,

an appropriate amount of hyaluronic acid is injected.

Even so, it may not settle properly,

so additional manual shaping is needed.

This process is called molding.

Because it is a viscous substance,

the way it is manipulated affects the shape it takes.

It may be shaped while being injected,

or later adjusted again through a retouch-like process

if the result is not satisfactory.

Since there are steps that directly require the medical staff’s hands,

you should pay attention to the clinician’s experience

when choosing a dermatology clinic.

Skill matters

Clinical experience from the medical staff matters not only

for forehead filler molding but also in other areas.

In any field, a skilled professional with a lot of experience

can achieve better results in various situations

and has the ability to solve problems relatively easily and quickly.

That kind of dexterity can directly affect the quality of the procedure result.

First, its importance can be mentioned in the design process.

The skill to design a shape that does not look awkward

and naturally connects to the eyebrow line

so that it does not harden unnaturally

can be built through the clinician’s experience.

In addition, the process of determining the appropriate injection amount

can also be influenced by clinical experience.

In general, 2.5 to 3.5 cc is injected

to achieve an appropriate shape.

Even if a dosage has been decided before the procedure,

it may be adjusted depending on the situation.

To make a good judgment in such cases,

you need experience from performing many procedures.

For this reason, you should look for a dermatology clinic with medical staff

who have extensive clinical experience,

and there is something else to consider as well.

Reducing risk

If you focus only on forehead filler molding,

you may miss the very important issue of side effects.

It is true that the risk is relatively lower than with methods such as the fat grafting mentioned earlier,

but if it is not managed properly, the likelihood of side effects can increase,

so caution is needed.

This depends not on individual care but on the care provided by the dermatology clinic,

so you need to be even more careful.

First, it is good to see whether a cannula is used.

In the past, there were serious problems such as blindness and necrosis,

to the point that it was hard to call it a mini procedure.

But those problems occurred when sharp needles were used

and the product was injected into a blood vessel.

Now, because a blunt cannula is used,

the possibility of blood vessel damage or injection in the wrong direction

has been greatly reduced.

As some of you may know, there is also a risk called biofilm.

It occurs when the treatment area or tools are not properly sterilized.

It is a cluster of bacteria in which germs form a film around the drug injected into the body,

and it can cause swelling and warmth,

so you should check whether you can receive the procedure in a sterile environment.

Trustworthy preparation

No matter how well you receive forehead filler molding,

if the product is not proper, it will be difficult for it to settle well.

Although the frequency has decreased these days,

there are still some dermatology clinics that do not follow the principles of using genuine products and the correct amount,

so it is good to look for a place that has built trust with patients over a long time by following those principles.

In particular, it is important to check whether the hyaluronic acid used in the procedure

is an FDA- or KFDA-approved product.

That is because even if hyaluronic acid is friendly to the human body,

a product that has been approved should be used to reduce the burden.

Hyaluronic acid is chosen more often because,

if the result is not satisfactory and needs to be corrected or removed,

it can be dissolved.

Even among similar ingredients, many manufacturers produce products,

so it can be useful to look into what type is being used in detail.

At the very least, considering the pros, cons, and characteristics of the two options, domestic and Korean-made,

can help you choose a product that fits you.

Effort is important too

If you want to maintain the shape properly after receiving forehead filler molding,

it is important not to be exposed to environments that can make things worse.

It is recommended that you follow the instructions you are given carefully when managing it.

First of all, do not touch or handle the area on your own.

Since the molding has already been completed through the medical staff’s hands so that the shape can settle,

you should be careful not to make it worse by touching it yourself.

If you usually do facial massages such as gua sha,

you should refrain for at least 2 to 3 weeks.

Also, vigorous exercise and visits to places with high heat,

such as jjimjilbangs and saunas, are best avoided for one week.

Smoking and drinking negatively affect blood circulation,

so quitting smoking and avoiding alcohol are recommended.

Although there are individual differences, bruising and swelling are usually common.

If you wait about a week, they will gradually fade and disappear,

so there is no need to worry.

If you make your decision while paying attention to these points as well,

you will be able to resolve your concern well.