Yeongdeungpo Station filler dermatology,
Belotero filler for the forehead and nasolabial folds,
and what matters most?

“I want to get filler,
but there are so many products that I don’t know which one to choose.
And I’m scared it might hurt,
and worried that my skin might react badly...”
Most people who are considering fillers have two main concerns.
One is which product to choose, and the other is concern about pain or skin reactions.
Although fillers are now a very common procedure, the expected effects differ depending on the area of the face, and since it is still a procedure that is performed on the skin, there are several important points to consider.
Today, we’ll go over the key features of Belotero, one of the leading imported filler brands, along with what effects it may have by treatment area such as the forehead, nasolabial folds, lips, and front cheeks, and what you should pay attention to in order to get the best results.
Yeongdeungpo Station filler dermatology
(Department: Dermatology)
Yeongdeungpo Station filler dermatology (Department: Dermatology)
What kind of product is Belotero filler?
Filler products come in a huge variety of brands, from domestic to imported.
Among them, Belotero is a Swiss hyaluronic acid filler, and it has several characteristics.

The key feature of Belotero is its patented CPM (Cohesive Polydensified Matrix) technology.
Although it is a single filler, different densities coexist within the formulation, so when injected into the skin, it adheres naturally while causing less uneven or foreign-body sensation.
Compared with domestic fillers, results vary by individual, injection area, and lifestyle habits, but in general the duration tends to be somewhat longer.
The price is somewhat higher than domestic products, but considering the duration, it can be a reasonable choice in the long term.

It also has a wide lineup, such as Soft, Balance, Intense, and Volume, so it can be chosen according to wrinkle depth and the amount of volume needed.
For example, Soft can be used for fine lines around the mouth, Balance or Intense for deeply etched nasolabial folds, and Volume when you want volume in a broad area such as the cheeks.
However, imported fillers are not always the right answer, so after consultation it is much more important to choose the appropriate product by comprehensively considering your skin condition, age, and the characteristics of the area to be injected.
Yeongdeungpo Station filler dermatology (Department: Dermatology)
Main treatment areas
There are many areas where filler treatment can be performed. I’ll explain based on the main treatment areas.

If the forehead lacks volume and looks flat, or if the sides of the forehead appear hollow, it can create a generally dull impression.
In particular, if the forehead looks sunken, the midface may appear more prominent, or the face may look longer.
Adding appropriate volume here creates more dimension in the face and can make the overall proportions look more balanced.

Nasolabial folds are the wrinkles that form in an “八” shape around the nose and mouth, and as we age they naturally deepen, making them one of the 대표적인 signs that can make someone look older.
If the nasolabial folds are very deep, they can even create an impression of being stubborn, beyond simply looking older.
So when filler is injected into the nasolabial fold area, the hollow beneath the deepened folds is filled in, helping create a softer impression.

If the lips are too thin and do not match the facial proportions, the overall impression can look faint.
So adding a little volume to the lips can make the lip line more defined and give a livelier look.
Many people also worry about lip asymmetry, and by correcting only the necessary areas, a more balanced lip shape can be achieved.

If the front cheeks look flat or wide, the facial line does not appear lively and can give a flat impression.
So when filler is used to create the right point here, it adds dimension toward the center of the face and can make the face look smaller.
Yeongdeungpo Station filler dermatology (Department: Dermatology)
Important points during filler treatment
Now that we’ve covered general information about filler products and their effects, it seems we should go into a bit more depth.
Let’s talk about the important points in filler treatment.
You’ll probably have little trouble choosing a clinic if you keep in mind the points I’m sharing.
First, let’s talk about pain. The filler injection itself involves inserting a needle into the skin, so some degree of pressure or pain is unavoidable.
However, if you receive treatment at a place with a lot of experience and skilled hands, the pain can be significantly reduced. Even fine details such as adjusting the injection angle and speed can affect discomfort.

In general, places that are of a certain size and handle many different cases are more likely to have accumulated experience and high skill.
Also, filler treatment is safest when it starts slightly under-corrected and more is added later if needed.
If too much is injected at once, the face can look bloated and unnatural, and it may also cause side effects.

And there are people who are getting filler for the first time, or who have many questions. Most often, they ask about pain.
“My forehead is flat—what should be done and how?”
“I’m afraid of injections. Does it hurt a lot?”
“How much anesthesia is needed?”
“Is this a doll for children? Can I hold it?”
There are many questions like these.
If you’re worried that something is too trivial, or that you shouldn’t ask about it, you can ask the medical staff about it in detail.
No, it is a legitimate right. Medical staff have a duty to answer kindly, and you should check whether they really do so.

In addition, check whether they carefully plan the procedure while considering harmony with areas other than the treatment site.
Before performing filler treatment, the balance of the entire face should be assessed, and it is important to identify exactly where to add volume and where to reduce it.
For example, if filler is injected into the forehead, the connection line with the nose should also be considered, and when treating the nose, the balance with the chin tip and cheekbones should also be taken into account.
Nasolabial folds also should not simply be filled in as wrinkles; the decision of where and how much to inject should be made while looking at the overall volume distribution of the cheeks so that the result looks natural.
So even if the same amount is injected, the result can be completely different depending on the design, so when consulting, it’s a good idea to listen to the treatment plan and pay close attention to whether it is being analyzed and carried out in detail.

Lastly, the treatment is not over just because the procedure has finished.
After treatment, follow-up care is needed to check whether there are any unusual skin reactions, whether there is any foreign-body sensation, and whether you are satisfied with the volume.
At times like this, it is important whether you can contact the clinic at any time for confirmation, and it is best if the clinic contacts you first to proactively check these points.
Today, we explained Belotero filler, the main treatable areas, and what to look for when choosing a Yeongdeungpo Station filler dermatology clinic (Department: Dermatology).
I sincerely hope that what I shared today was helpful in choosing a product or deciding on a clinic.
If you have any additional questions, feel free to leave a comment.
Thank you. This was Yeongdeungpo UNNI^^
< What are the criteria for choosing a dermatology clinic in Yeongdeungpo? >
< Yeongdeungpo UNNI clinic hours >
Weekdays: am 10:00 ~ pm 08:30
Weekends: am 10:00 ~ pm 05:00
(No lunch break)
< Directions >
The Yeongdeungpo branch of UNNI Clinic
is located near Exit 5 of Yeongdeungpo Station.
