How to Get the Effect of 500 Shots with 300 Shots of Thermage FLX Near Gangnam Station

Hello.

I’m Mi-ra Lee, chief director of Vanny Plastic Surgery | Skin Clinic.

These days, patients understand more clearly that even when the same device is used, the results can vary depending on who performs the treatment. Among many devices, Thermage is one of the 대표적인 lifting devices that depends heavily on the clinician’s skill.

Although there are official guidelines provided by the manufacturer, the actual treatment method is not standardized, so each clinician may use different shot distribution, pressure, irradiation speed, and overlap method.

So even if 300 shots are delivered, the results may sometimes be limited to exactly that amount, sometimes turn out below expectations, and sometimes look as if 400 or 500 shots were used.

For this reason, when considering Thermage, it is especially important to look into whether the provider has their own know-how for producing effects beyond the basic shot count.

So today, I’d like to talk about how to get the effect of 500 shots with 300 shots. As always, I won’t mention abstract criteria like “you should look at the doctor’s clinical experience” or “you should check whether one-to-one customized treatment is provided.”

I’ll focus only on practical points: the real secret to creating meaningful differences in effect within a fixed number of shots, and how experienced Thermage clinicians approach the treatment differently.

Thermage 300 shots: how can it produce the effect of more than 500 shots?

1. The key is how much effect can be maximized within a set number of shots.

How to maximize the effect of Thermage FLX near Gangnam Station

Thermage is a device that delivers radiofrequency (RF) thermal energy into the dermal layer of the skin. Through that heat stimulus, it regenerates collagen and contracts loosened tissue to induce a tightening effect.

In other words, the effect of Thermage depends on how much collagen production is stimulated inside the skin and how firmly the existing collagen structure is reorganized (remodeled).

This heat stimulus accumulates in the skin with each round of irradiation, and the more shots are delivered, the greater the total accumulated energy, which leads to more collagen response. That is why increasing the number of shots produces a larger effect and also covers a wider area.

Thermage FLX near Gangnam Station, Vanny Plastic Surgery | Skin Clinic

The problem is?

Right, the more shots you use, the higher the cost. If price were not an issue, anyone would want 600 or 900 shots. But Thermage itself is an expensive device, and the consumable called the Tip used during treatment is also quite costly, so the treatment price is generally high.

Therefore, from both the patient’s and the provider’s perspective, the most important challenge is: “How much effect can be maximized within a fixed number of shots?”

2. The key is lowering skin resistance (impedance)!

The key to lowering skin resistance for Thermage FLX near Gangnam Station

The reason why 300 shots can look like 500 shots for one person and like 200 shots for another is due to several factors, but the biggest one is skin resistance.

Our skin naturally has resistance. It is a normal response that helps protect the skin from external stimuli. And Thermage uses radiofrequency energy, which passes through the skin and is converted into heat by the resistance of the skin tissue.

Thermage FLX near Gangnam Station, Vanny Plastic Surgery | Skin Clinic

If resistance is high, the heat does not transfer deeply into the skin and instead disperses at the surface. As a result, enough heat cannot accumulate in the dermal layer, and the key layer that should be stimulated to produce collagen does not respond properly.

On the other hand, what happens if Thermage is performed after lowering skin resistance?

Right. The total amount of energy accumulated in the skin increases, which can ultimately promote more collagen production.

So the core of Thermage treatment is

lowering skin resistance.

When the skin’s moisture level and hydration improve, skin resistance decreases, and radiofrequency energy can be delivered deeper and more widely into the skin.

As a result, the total amount of energy accumulated in the skin increases, collagen production is enhanced, and the treatment outcome improves. That is why our clinic always carries out a preparatory process before Thermage to create these skin conditions.

The importance of hydration management before Thermage FLX near Gangnam Station

If you reduce impedance through hydration management before the procedure so that radiofrequency energy can pass through the skin and tissue more effectively, the effect can be maximized.

It may look like a simple form of care on the surface, but in reality, it is a key preparatory step that determines the effect of Thermage. Even with the same 300 shots, depending on whether this process is done properly, the result after treatment may feel like 200 shots or may appear as strongly as 500 shots.

Additional tip: shot distribution also matters.

Previous image Next image

If there is a preparatory process that allows more energy to be delivered into the skin by lowering skin resistance, the next thing to check is shot distribution. Thermage generally needs to raise the internal skin temperature to around 55°C or higher for collagen fibers to contract and for the subsequent regeneration process to be promoted.

The problem is that it is difficult to reach this temperature with just one shot. That is why shots must be repeatedly overlapped on the same area, with irradiation done in an overlapping pattern. Only then can heat accumulate stably inside the skin and actually trigger a collagen response.

Thermage FLX near Gangnam Station, Vanny Plastic Surgery | Skin Clinic

So here is the question! What happens if the limited 300 shots are evenly distributed across the entire face?

It becomes difficult for enough heat to build up in each area, and the internal skin temperature may fail to reach the target level, resulting in insufficient collagen response. In other words, the treatment may start but not fully get going.

So for Thermage, it is important to design the shot count according to each facial area’s concerns, size, and level of elasticity.

Even with the same 300 shots,

the results can vary greatly.

Vanny Plastic Surgery | Vanny Skin Clinic near Gangnam Station

To briefly summarize what I’ve said today, the effect of Thermage does not depend solely on the number of shots.

1. Whether there is a process to lower skin resistance before treatment

2. Which areas received concentrated irradiation, and how the shots were delivered

And beyond these two, there are many other factors that influence the outcome, such as how well the skin and tip are in contact, the angle of the tip, and the energy level suited to each patient’s skin condition. That is how important it is to choose the right clinic for Thermage. If you are paying a high price for it, you should get results that are worth more than that.

I hope today’s article was truly helpful for those who are wondering where to get Thermage. I’ll wrap up here.

I am Director Mi-ra Lee, and I believe in removing exaggeration and filling things with sincerity. Thank you.

( In the second Thermage column, I’ll cover the advantages of Thermage FLX under sleep anesthesia and synergistic treatments that can further enhance the Thermage effect. )

P.S. We are currently running various Thermage FLX events, so if you have any questions, please feel free to contact us. :)